Fig. 7/1
Fig. 7/2
Fig. 7/3
Pre-motor Filter
6. Accessories
Fig. 6/1
Fig. 6/2
Crevice tool : For crevices, corners, cracks etc.
Dusting brush : For delicate surfaces.
Upholstery tool : For carpet, upholstery, stairs etc.
6
Accessories/Dust Bag & Filters: Removal & Replacement
7. Dust Bag & Filters:
Removal & Replacement
IMPORTANT: Always remove the plug from the wall
outlet before assembling or before removing
accessories.
1. The accessories can be attached directly to the
handle by removing the tubes and pushing in the
desired accessory (Fig. 6/1).
1. Turn off the vacuum cleaner and unplug it from the
mains. Remove the hose. Unclip the retainer clips
on either side of the vacuum cleaner and lift off to
gain access to the dust bag compartment
(Fig. 7/1).
2. Lift out the full dust bag (Fig. 7/2).
3. Dispose of the full dust bag and insert a new dust
bag back into the vacuum cleaner aligning the
front of the dust bag with the inlet slots (Fig. 7/3).
1. Turn off the vacuum cleaner and unplug it fron the
mains. Unclip the retainer clips on either side of
the vacuum cleaner and lift off to gain access to
the dust bag compartment (Fig. 7/4).
2. The accessories can also be attached to the
extension tube for extra reach. Remove the
combination floor tool and push on the desired
accessory (Fig.6/2).
IMPORTANT: Always unplug the vacuum cleaner
from the electrical outlet before removing the dust
bag.
IMPORTANT: DO NOT use the vacuum cleaner
without ALL of the filters in place.