7.
Retur
n the filter to the top of the dirt container lid
by aligning the tabs and tur
ning clockwise to lock
into position (Fig.6/6).
8.
Retur
n the filter shr
oud by aligning the smaller
tabs and tur
ning clockwise to lock into position
(Fig.6/7).
9.
Join the lid to the dirt container by aligning the
tabs and tur
ning clockwise to lock into position
(Fig.6/8).
1
0
.
Place the dirt container back into the vacuum
cleaner body until it clicks into position (Fig.6/9).
Dirt Container & Filters: Removal & Replacement
6
Fig.6/8
Fig.6/9
Fig.6/6
Fig.6/7
3.
Lift up the handle on the dirt container and tur
n
anti-clockwise to expose the filter housing
(Fig.6/3).
4.
Remove the filter shr
oud by r
otating it anti-
clockwise and pulling away fr
om the dirt
container lid (Fig.6/4).
5.
The HEP
A filter can then be r
emoved by r
otating
it anti-clockwise and pulling away fr
om the dirt
container lid (Fig.6/5).
6.
Gently tap the filter against the side of a rubbish
bin to r
e
move excess dirt.
NOTE
: The filter and filter shr
oud may also be
washed by running it under the tap in lukewarm
(max 40ºC) water
. V
ax r
ecommend washing the filter
once a month or when suction appears r
educed.
Always allow the filter to air dry for 24 hours befor
e
replacing into the cleaner
.
Fig.6/5
Fig.6/3
Fig.6/4
Vax V-048 D8 bf 10/12/05 9:44 AM Page 6
