www.vax.co.uk
4
assembly
3. How to Assemble
WARNING:
Use only vax AAA carpet cleaner with
this machine. Using other cleaning solutions may
cause excessive foaming. Excessive foam will cause the
float to shut off the vacuum prematurely. Using other
soaps will void your warranty.
Filling Clean Water Tank
Press down on the Lid. Release Latch and tilt lid towards
front of cleaner to access the tanks.
Remove Clean Water Tank by pulling up and out of cleaner.
Unscrew cap and fill Clean Water Tank with solution
up to the Soap Fill Line (Fig 3/3). Fill the rest of
the Clean Water Tank with warm tap water (max 40°C)
up to the Water Fill Line (Fig 3/3a).
Replace Clean Water Tank cap and tighten firmly.
Return Clean Water Tank to cleaner (Fig 3/4). Close lid
making sure that the Lid Release Latch clicks into place
(Fig 3/4a).
Connecting Attachments
NOTE:
Always turn off appliance before connecting
or disconnecting attachments.
Connect desired attachment by pressing tool onto the end
of the attachment hose until the locking button snaps into
the hole.
WARNING:
Keep spray pointed away from face.
Failure to do so may result in personal injury.
To remove, press down on the locking button and pull the
tool away from the hose.
Fig.3/1
Fig.3/5
Fig.3/6
Fig.3/4
Fig.3/2
!
!
!
Fig.3/3
Fig.3/3a
Fig.3/4a
Locking button
Vax V-033 User Guide.qxd:Vax V-033 User Guide 3/9/08 16:45 Page 4