6. Spare Parts
Filter kit A
(pre-motor filter, post-motor filter) Vax part number 1-1-125641-00
Filter kit B
(central filter, pre-motor filter, post-motor filter) Vax part number 1-1-125642-00
To purchase Vax consumables, visit
www.vax.co.uk
7
Spare Parts/Troubleshooting/Technical Specification
7. Troubleshooting
PROBLEM: Vacuum cleaner won't run
Cause:
Power cord not firmly pushed into mains socket.
Solution:
Plug cord in firmly to power outlet.
Cause:
Blown fuse or tripped circuit breaker.
Solution:
Check fuse/breaker. Replace fuse or reset breaker.
PROBLEM: Vacuum cleaner won’t pick up/loss of suction
Cause:
Dust container not installed properly.
Solution:
Re-install dust container.
Cause:
Dust container full.
Solution:
Empty the dust container.
Cause:
Nozzle/dirt passage clogged.
Solution:
Remove obstruction.
Cause:
Filters are clogged.
Solution:
Clean or replace filters.
Cause:
Accessories not attached correctly.
Solution:
Check the accessories are firmly connected.
Cause:
Combination floor tool in wrong position.
Solution:
Check the rocker is in the correct position for carpets or hard floors.
PROBLEM: Dust escaping from vacuum cleaner
Cause:
Dust container not installed properly.
Solution:
Re-install dust container.
Cause:
Dust container full.
Solution:
Empty the dust container.
8. Technical Specification
Power supply:
220-240V/50Hz
Motor power:
1800W
Dust container:
Bagless
Dust container volume:
2.7 litres
Filter system:
Central filter (washable)
Post-motor (exhaust) filter
Pre-motor filter
Cord length:
6 metres
Weight: 8.6kg
Subject to technical change without notice.
