6
Accessories / Dirt Container & Filters
5. Accessories
1.
The accessories can be attached directly to the
handle by removing the telescopic tubes and
pushing in the desired accessory.
2.
The accessories can also be attached to the
telescopic extension tube for extra reach.
Remove the combination floor head and push
on the desired accessory.
Crevice tool:
for crevices, corners and cracks,
etc.
Dusting brush:
for delicate surfaces.
Upholstery tool:
for carpet, upholstery, stairs, etc.
TurboBrush
(Model: V-096TB/V-096X only): for
pet hair and larger carpeted areas. (
NOTE:
not
recommended for hard floors).
Hard floor tool
(Model: V-096X only): for hard
floor, parquet and laminate coverings.
TurboTool
(Model: V-096TT/V-096TB/V-096X
only): for pet hair, stair and upholstery cleaning.
X-tend
(Model: V-096X only): for bottom-to-top
stair cleaning.
1.
The hose fits directly into the hose inlet on the
vacuum cleaner.
2.
The handle fits directly on to the telescopic
extension tube.
3.
To release the extra length hose, press the
release clips located on the handle.
6. Dirt Container & Filters:
Removal & Replacement
IMPORTANT:
Always unplug the vacuum cleaner
from the electrical outlet before removing the dirt
container.
IMPORTANT:
Do NOT use the vacuum cleaner
without ALL of the filters in place.
Emptying the Dirt Container
1.
Lift the two buttons located either side of the
carry handle (under the top cover) (Fig.6/1). Lift
up the top cover and pull out the dirt container.
2.
Press the button as indicated (Fig.6/2) to
empty the dirt into a rubbish bin. When all of
the dirt has fallen, close the dirt container flap
and replace the dirt container.
Cleaning the Filter
1.
Pull our the central filter (Fig.6/3).
2.
Gently tap the filter against the side of a rubbish
bin to remove excess dirt.
NOTE:
Twist the centre dial on the filter to
aid cleaning.
Fig.6/3
Fig.6/1
Fig.6/2
V-096X User Guide 1/8/06 16:28 Page 7
