---
Operation
4
IMPORTANT:
Always remove the power plug from the electrical outlet before assembling or removing accessories.
Assembling your vacuum cleaner
Firmly push the back panel
onto the base assembly.
Ensure it is fully located
before inserting the two
short screws.
Slide the handle into
place onto the top of the
back panel.
Secure the top handle to
the back panel by inserting
the two long screws.
Line up here
Insert the bottom of the dirt
container to align with the
tab on the upper cover of
the motor. To secure the
dirt container, push the top
in place, there will be an
audible click when it is
secure.
Align the tabs on the
lower hose/inspection
tube with the slots on the
hose.
Push and turn the hose
clockwise until secure.
Wrap the hose round and
through the hose clip and
then down and insert into
hose connector.
This vacuum cleaner is equipped with a convenient cord storage feature. The
power cord winds around the two cord holders at the side of the unit. The bottom
cord holder has a quick release feature. Turn the cord hook to the left or the right
to remove the power cord.
V-1800_UG_[03.04.13]_User guide 04/04/2013 18:23 Page 4
