background image

Warning: 

Always switch off and unplug the carpet washer from the electrical outlet before assembling, filling and emptying the clean water tank, 

emptying the dirt water tank, or before connecting/disconnecting the attachments.

Important: 

Carpets should be dry vacuumed thoroughly before washing.

Caution:

 The carpet washer is a very powerful unit. Before plugging the cord into the electrical outlet, make sure all controls on the unit  

are turned off. Hold the carpet washer firmly when starting and in use.

Important: 

The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will automatically turn the 

unit off. Should this occur, unplug the carpet washer from the electrical outlet and turn off the switch. Check the hose for blockages.  

Clean the filters. Allow the unit to cool for approximately one hour. To re-start the machine, plug it into an electrical outlet and switch it back on.

What to do if it goes wrong

Getting in touch

*  Calls are charged at the UK local rate. Please make a note of the serial number and model number of the product before calling. 

•  The plug may not be fully pushed into the electrical socket.
•  Check the fuse in the plug if this needs replacing, always 

replace with a 13amp fuse

•  Make sure the clean water tank is fitted securely
•  The clean water tank valve may be stuck, hold the clean water 

tank over the sink and press the valve underneath to release

• Check the power brushes for blockages and clear 
• Check the belt Go to ‘Replacing the belt or brushbars’

•  The float in the dirty water tank may have been activated. 

Empty the dirty water tank wait for the float to settle before 
re-starting your carpet washer

• Check the dual spin power brushes for blockages and clear
• The dirty water tank may not be fitted correctly, also make 

sure the lid is pushed down securely 

• Check the nozzle for blockages and clear

Solution

Problem

Why won’t my carpet 

washer turn on?

Why won’t the solution/

clean water dispense?

Why won’t my carpet 

washer pick up?

Why won’t the  

brushes spin?

Содержание U86-PM Series












Отзывы: