![background image](http://html1.mh-extra.com/html/vax/tbt3v1t1/tbt3v1t1_manual_4198554018.webp)
Removing and replacing the brushbar
Let’s talk technical
To re-fit the brushbar, firstly push the brushbar onto
the brushbar cover, then slide the brushbar and cover
back into the brushbar housing. Make sure the end of
the brushbar sits securely in place. Refit and tighten
the screws to secure.
On the base of the
floorhead, find letter
A
to indicate the side of
the brushbar cover that
needs to be removed.
Using a cross head
screwdriver, unscrew the
three screws and remove
the brushbar cover.
Clear any threads or
hair from around the
brushbar and any dirt/
debris inside the housing
of the Powered Head.
Slide the brushbar out
from the brushbar housing.
Removing and replacing the belt
On the base of the
floorhead, find letter
B
to indicate the side of
the belt cap that needs
to be removed.
Using a cross head
screwdriver, unscrew the
three screws and remove
the cover.
Refit the belt cover and
tighten the screws to
secure.
If the belt is broken,
remove this and slide the
new belt onto the cogs.
A
B
Содержание TBT3V1T1
Страница 21: ...Getting in touch Registration required Terms and conditions apply see vax co uk for details ...
Страница 22: ...Notes ...
Страница 23: ...Notes ...