Emptying the twin tank
Cleaning the microfibre cleaning pad
Storing your steam mop
Press the twin tank
release button and lift the
twin tank by the handle.
Hold corner of pad down
with foot and lift steam
mop to peel away.
Empty any excess water,
replace water cap and
turn clockwise to tighten.
Wrap the power cord
around the quick cord
release hooks.
Twist water cap
anti-clockwise and lift
to remove.
The microfibre pad is
machine washable (Max
40°C) allow to fully dry
before use.
Taking care of your machine
IMPORTANT:
Allow the steam mop to fully cool down before performing any maintenance or troubleshooting checks.
Don’t leave water or detergent in the twin tank between uses, as this can eff ect the machines performance, the
twin tank needs to be emptied and rinsed after each use.
IMPORTANT:
Don’t use bleach or fabric softener when washing the microfi bre cleaning pad.
Always allow the steam mop to fully cool down before removing the microfi bre cleaning pad.
IMPORTANT:
Don’t operate the steam mop without hard water fi lter in place. The condition of the fi lter aff ects
the performance of your machine, check and change fi lter periodically. If you live in an area of hard water the
fi lter will discolour or darken over time. Depending on water hardness and frequency of use, the fi lter should
be changed every 3 to 6 months or if the fi lter has discoloured.
Max 40°C
