Vax SLIMVAC Pro, Руководство пользователя

Страница: 7 / 20

Getting started
Assembly
Line up the connector on
the reach wand with the
floor head. Push the reach
wand down onto the floor
head until it clicks into
place.
Push the handheld down
onto the reach wand until
it clicks into place.
This vacuum cleaner is
not free standing and in
between uses the vacuum
must always be placed in the
wall mount or laid flat on the
floor, in a suitable location
so it does not become a trip
hazard or can be stepped on.
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Before you begin
CAUTION : Always switch off the vacuum cleaner before connecting or disconnecting the handheld/attachments
or removing and emptying the dust bin.
IMPORTANT: The vacuum cleaner is equipped with overheat protection. If for any reason the vacuum cleaner does
overheat the thermostat will automatically turn the vacuum cleaner off. This would be indicated by all three lights
on the Power and Charge Indicator flashing. If this happens, empty the dust bin and check the vacuum cleaner for
blockages. Allow the vacuum cleaner to cool for approximately 1 hour (if you have washed the filter please wait 24
hours for the filter to fully dry before reinstalling back into the machine).
For best cleaning results, filter should be tapped over a bin every 4-6 uses, to remove dirt and debris, and replaced
every 6-9 months, depending upon use. Also, regularly remove any threads or hair from around the brushbar for best
performance.
CAUTION
: This vacuum cleaner is not free standing. In between uses or when carrying out any maintenance always
lie the vacuum flat on the floor, in a suitable location so it does not become a trip hazard or can be stepped on.