Vax Reach MAX VX94, Руководство пользователя

Страница: 3 / 20

3
Safety
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety. Children should be
supervised to ensure that they do not
play with the appliance.
Keep fingers, hair and loose clothing
away from moving parts and openings
whilst using the stick vac.
Don’t use the stick vac if it has been
dropped, damaged, immersed in water
or left outdoors.
Don’t handle the charger plug or
use the stick vac with wet hands.
Don’t use the stick vac charger if
the charger cord or plug is damaged.
Don’t unplug the charger by pulling
on the charger cord.
Power supply
Don’t charge the stick vac outdoors,
or leave the charger connected to the
mains when not in use.
Don’t use the stick vac with the
incorrect charger as this may result
in damage or injury to the user. The
correct charger information is listed on
the ratings label.
Always use the charger supplied
with the stick vac. If charging the stick
vac through an extension cord, use
only Australian Certified extension
cord. Care should be taken to arrange
the extension cord as it can be a trip
hazard.
Brushbar
Storage
Store your stick vac in a cool, dry
area. If filters have been cleaned as
per user guide instructions ensure
they are thoroughly dry before storing
WARNING:
The brushbar in
the powered head constantly
rotates when switched on. Never
use the powered head on one
spot for an extended period of
time as the brushbar may damage
the floor surface. Always turn the
powered head brushbar off when
cleaning hard floors. To prevent any
damage being sustained, test on an
inconspicuous area of the flooring
first.
!
CAUTION: If the brushbar in
the powered head has been
obstructed, the brushbar motor
protection sensor may have been
activated. The brushbar will stop
and the light on the powered head
will illuminate red. To reset switch
the brushbar and stick vac off,
remove the powered head from the
reach wand/handheld and clear any
obstruction. Wait 1 minute before
refitting the powered head tool,
switch the stick vac on and press
the brushbar ON/OFF button.
WARNING:
For the purposes
of recharging the battery, only
use the detachable supply unit
provided with this appliance.
!