Vax Rapide Ultra VCWRU1000 Скачать руководство пользователя страница 3

---

www.vax.com.au

 

3

General Safety Information

vax.co.uk

3

FOR HOUSEHOLD USE ONLY.

When using the carpet washer, basic safety precautions should
always be observed, including the following:

1.

Do not leave the carpet washer unattended when
plugged in. Unplug it from socket when not in use.

2.

To prevent electric shock do not use outdoors.

3.

Not to be used as a toy. Children should be supervised to
ensure that they do not play with the appliance.

4.

This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning the use of the appliance by a person
responsible for their safety.

5.

Use only as described in this manual.

6.

Do not use the carpet washer if it has been
dropped, damaged, left outdoors or dropped into
water. Do not use the carpet washer with a
damaged cord or plug. If the supply cord is damaged, it
must be replaced by the manufacturer or a
recommended Service Agent to avoid hazard and
invalidating the guarantee.

7.

Do not pull or carry by cord/hose. Do not use the
cord/hose as a handle, close a door on the cord/hose
or pull cord/hose around sharp edges or corners. Do
not run the carpet washer over the cord/hose. Keep
the cord away from heated surfaces.

8.

Do not unplug by pulling on the cord.

9.

Do not handle the plug or carpet washer with wet
hands.

10.

Do not put any objects into openings or operate with
openings blocked, keep them free of anything that
may reduce airflow.

11.

Keep hair, loose clothing, fingers and all parts of the
body away from openings and moving parts.

12.

Do not use the carpet washer on any glowing,
burning or smoking particles.

13.

Do not use without the solution tank and dirty water
tank in place.

14.

Turn off all controls before unplugging.

15.

Do not use to pick up flammable or combustible
liquids such as petrol, or use in areas where they may
be present.

16.

Keep the unit on the floor.

17.

Do not attempt to remove blockages with sharp
objects as they may cause damage.

18.

Store indoors put away after use to prevent tripping
accidents.

19. Using improper voltage may result in damage to the

motor and possible injury to the user. The correct
voltage is listed on the rating label.

20.

A hazard may occur if the carpet washer runs over
the power supply cord.

21 . To prevent dirty water from running into the motor, do

not hold the appliance upside-down or lay on its side.
Use appliance in normal cleaning position.

22. Use extra care when cleaning on stairs.

23. Do not carry appliance while motor is running.

WARNING:

Always switch off and unplug your

machine from the electrical outlet before filling and

emptying the clean water tank, emptying the dirty water tank,
before assembling, opening, before connecting/
disconnecting the attachments, or carrying out maintenance
or troubleshooting checks and storage.

NOTE:

Carpets should be dry vacuumed thoroughly

before washing.

IMPORTANT:

If the hose or tools are blocked, switch

off and unplug the carpet washer and remove the
blockage(s) before re-starting your machine.

See maintenance.

IMPORTANT:

Cleaning filters maintains cleaning

performance. Vax recommends that your filters

should be checked and cleaned periodically. If your filters are
washable make sure they are completely dry before
inserting back into the machine.

This machine is intended for household use only, and
NOT for commercial or industrial use.

PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER
USE.

!

!

!

!

W90-RU & W89-RU Series User Guide v1.3.qxd:User guide  1/2/11  12:41  Page 3

24. Use only SAA approved 10amp extension cords. 

Non-approved cords may overheat. Care should be 
taken to arrange the cord so that the cord cannot be 
tripped over.

General Safety Information

Содержание Rapide Ultra VCWRU1000

















Отзывы: