Using your machine
Operation
Fill the remaining space in the
solution reservoir with warm tap
water. Replace the measuring cap.
NOTE:
use only Vax Solution, using
other cleaning solutions may cause
excessive foaming. This may cause
the fl oat to shut off the cleaner
prematurely. Using other cleaning
solutions will invalidate your warranty.
The switch is located on the back of the
cleaner, next to the handle release.
The power switch controls the
vacuum motor. Press on the handle
release pedal and pull the cleaner
back into a reclined position.
Place the bottom of the solution
reservoir into the cleaner and push
into place. There will be an audible
click when the reservoir is in the
correct position.
Whilst depressing solution spray
trigger, push carpet washer in a
forwards motion. Release trigger
and pull unit backwards in same
path to remove dirty water and
solution from the carpet.
Plug the cord into a mains
electricity socket. Turn the power
switch on.
Repeat if necessary, when the dirty
water reaches the max fi ll line on
the dirty water tank empty the tank.
IMPORTANT:
Maximum water temperature 50°C
IMPORTANT:
Never leave the cleaner unattended with the power on.
NOTE:
Vacuum carpets thoroughly with dry vacuum cleaner before washing.
