7
Vax Careline
0844 4128 455
operation/ maintenance
While making sure the dirty water tank is resting on the
base, place the rear of the tank into the base of the
cleaner, push down on the handle until it latches.
Replace top of dirty water tank by pressing it into place
(Fig 4/16).
5. Maintenance
Brush removal and replacement
NOTE: The plug must be removed from socket outlet
before cleaning or maintaining the appliance.
Remove the water tank switch off and unplug carpet
washer.
Flip the cleaner on its side to expose the nozzle base.
Lift out the floating brush bar by pressing the two
latches and pulling it gently (Fig 5/1).
Replace floating brushbar (Fig 5/2).
Cleaning the tank filter
IMPORTANT: Do not use any detergents or
boiling water to wash the filters. Vax
recommends checking the filters every time the dirty
water tank is emptied.
NOTE: All filters must be in place before using
your machine.
Remove the dirty water tank from the unit.
Remove the filter cover from the back of the tank.
Separate the filter from the filter cover.
The filter can be rinsed in warm water (max. 40
°
C)
IMPORTANT: Ensure filter is fully dry before
replacing back into the machine.
Fig.4/16
Fig.5/1
Fig.5/2
24hr
Fig.5/6
!
40° C max
!
!
!
Fig.5/5
Fig.5/3
1
2
1
2
3
Fig.5/4
3
V-135 Series Rapide Spring User Guide.qxd:V-135B User Guide 20/8/09 09:10 Page 7
