Vax Quicklite V-046, Инструкция по эксплуатации

Страница: 7 / 12

7
Belt Replacement
Fig.6/4
Fig.6/7
Fig.6/8
Fig.6/9
Fig.6/5
Fig.6/6
To Replace Belt or Brushbar
Lift and remove brushbar. Dispose of old belt
(
Fig.6/4).
Slide belt onto motor shaft (
Fig.6/5).
Place new belt in area of brushbar without bristles
(
Fig.6/6).
With new belt in place, pull and slide brushbar
into vacuuming head making sure that the
brushbar end caps are in the correct
orientation. Rotate brushbar manually to make
sure belt is properly aligned (
Fig.6/7).
Be sure to replace all six (6) screws ( Fig.6/9).
Re-attach vacuuming head guard ( Fig.6/8).