Attach both wheels and push until
they click into place.
Attach the hose connector to water
inlet by turning clockwise until tight.
Slot the handle into the top of the
machine and insert the 2 screws.
Turn clockwise to tighten, making
sure not to trap the solution tube.
Assembling your pressure washer
Preparing your pressure washer for use
Always make sure the pressure washer and water supply is off before connecting or disconnecting the hose
and accessories. The pressure washer is equipped with a thermal cut-out. If for any reason the pressure washer does
overheat the thermostat will automatically turn the washer off. If this happen switch and unplug from the electrical socket.
Remove the lance, nozzle and filter and check for blockages. Allow the pressure washer to cool for approx 4 hours
Always check water hose, pressure hose, lance and accessories are not damaged broken or worn before use.
Push the pressure hose firmly to the
water outlet and turn the pressure
hose collar clockwise until tight.
LOCKED
UNLOCKED
A trigger safety lock is located
underneath the handle. The safety
lock should always be in LOCKED
position before connecting/
disconnecting the pressure hose to
the trigger handle.
Getting started
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
IMPORTANT:
Always make sure the trigger safety lock is in the LOCKED position when not in use or connecting/
disconnecting the pressure hose.
To connect pressure hose to trigger
handle, press the pressure hose
release button and push pressure
hose to lock into position.
Gently pull the pressure hose to
check the connection.
*
To purchase consumables and accessories, please visit
vax.co.uk
Never use the turbo
nozzle on cars,
tyres and engines.
CAUTION
All manuals and user guides at all-guides.com
