Vax PowerWash 2500w, Руководство пользователя, Страница: 9 / 24

Using your machine
Make sure the water supply is
not connected. Firmly push the
water hose pipe with suitable
connector onto the water inlet
to lock into position.
Connect the water hose pipe
to a suitable water supply and
turn the water on.
Before plugging the machine in, press
the unlock safety button on the trigger
handle and squeeze the trigger until
water starts to flow through the nozzle.
Push switch to ‘I’ position to
turn on. The machine will run
for a few seconds then stop
but no water will be released.
Squeeze the trigger on the trigger
handle to release a high pressured
water jet, and start cleaning.
Push switch to ‘O’
position to turn off.
IMPORTANT: Always use an RCD (Residual Current Device) adaptor when using this pressure washer.
CAUTION: Don’t leave the pressure washer running when not in use, or more than 5 minutes to prevent overheating.
Connect the power cord
to the mains supply via
an RCD adaptor.
CAUTION
Don’t aim the pressure
washer directly at people,
animals, plants, electrical
components, wires or the
pressure washer itself.
Before switching the pressure washer on, the trigger handle must be squeezed to release water and any airlocks in the
machine or pressure hose. Always release any pressure build up in the handle prior to disconnecting the hose.