manualshive.com logo in svg
background image

• 

Check the ‘This pack contains’ panel on the box to make sure the  

part is included with your machine.

• 

Make sure the On/Off switch is set to the ‘I’ position (pressure 

washer) ‘II’ position (compressor).

• 

If the trigger has not been squeezed the pressure washer/

compressor will be silent, to activate squeeze the trigger handle  

(pressure washer function).

• 

The plug may not be fully pushed into the electrical socket.

• 

Check the fuse in the plug if this needs replacing, always replace  

with a British 13amp fuse.

• 

Check the RCD has not been tripped, reset.

• 

The power cord maybe damaged. Please contact our  

Please contact our Customer Care Line on: 0330 026 8455  

(Mon-Fri 8:30am to 6:30pm Sat 9:00am to 5:00pm).

• 

The thermal protector may have tripped. If this happens switch 

the pressure washer/compressor off and unplug from the mains. 

Remove the lance, nozzle and filter and check for blockages 

(pressure washer function) Remove valve connector (compressor 

function) Allow the pressure washer/compressor to cool down  

for approximately. 

• 

The pump may have stopped, make sure the On/Off switch is set to 

the ‘I’ position and check the plug fuse. 

• 

The pump may have stopped this may be because of overheating  

due to poor water supply. Check the water flow rate to your water 

supply, disconnect power and allow to cool down for approximately  

4 hours.

• 

Hose may be blocked or kinked, check for leaks in the hose and  

clear any blockages. Straighten out the hose to ensure no kinks  

and check the hose pipe connections to the tap and water inlet.

• 

There may be an air lock. Press the unlock safety button on the 

trigger handle and squeeze the trigger to release water before the 

pressure washer/compressor is switched on.

• 

Check the assembly of the solution tube and bag. Go to  

‘Using your machine’.

• 

Nozzle/accessory may be blocked, clear any blockages and clean 

with nozzle cleaning tool. Go to ‘Lets talk technical’.

• 

Turbo/jet nozzle attached, remove and attach solution nozzle. No 

solution will be released when using the turbo/jet nozzle. Go to    

‘Using your machine’.

Solution

Problem

What to do if it goes wrong

There is an  

accessory missing.

Why won’t my pressure  

washer compressor turn on?

Why won’t the pressure  

washer compressor dispense?

What to do if it goes wrong

Содержание PowerPlus VPW2C

























Отзывы: