Vax Power8 C84-TJ-Be, Руководство пользователя

Страница: 7 / 16

Getting started
Assembling your vacuum cleaner
Twist and lock hose
into hose entry point. Insert the hose grip into
telescopic extension tube.
Press button on telescopic
extension tube and adjust
to required length.
Insert the other end of
the telescopic tube into
the loorhead.
Before you begin cleaning
IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does
overheat the thermostat will automatically turn the vacuum cleaner of. If this happens, switch the vacuum cleaner
of and unplug. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum
cleaner to cool for approximately 1 hour (if you have cleaned the ilters please wait 24 hours for the ilters to fully dry
before putting back into the machine).
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
IMPORTANT: The combination loorhead can be attached
directly to the telescopic tube or hose handle.
Always switch of
the vacuum cleaner
before connecting or
disconnecting the hose
/attachments, or removing
and emptying the
dirt container.
CAUTION
The tool connector must be itted on the hose
when using the TurboTool (some models only).
Using accessories
Choose an accessory and
push onto the telescopic
extension tube or hose.