Removing blockages
WARNING:
To reduce the risk of electric shock, turn the vacuum cleaner off and unplug from the electrical socket
before performing maintenance/troubleshooting checks.
Disconnect the hose from the vacuum cleaner and remove any blockages found then reconnect the hose securely.
Removing blockages from the brushbar
Removing blockages from the TurboToo
l
(some models only)
Turn the TurboTool over and slide
off the locking ring.
Detach lower housing and
remove blockage.
To re-assemble the TurboTool,
ensure that the tabs are engaged
and pivot the lower housing closed.
Slip the locking ring over the neck
of the TurboTool and into the
groove to finish.
Locking
ring
Tabs
Unscrew the five screws
on the base of unit.
Remove floor nozzle cover.
Lift brushbar.
Remove the belt from the
end of the brushbar.
Maintenance
(Keep your Vax as good as new)
9
vax.co.uk
U89-P8 Power 8 V1.3 28.01.13_User guide 29/01/2013 16:31 Page 9
All manuals and user guides at all-guides.com