Vax Platinum SmartWash CDCW-SWXP, Руководство пользователя, Страница: 7 / 16

7
Use the pretreat wand to loosen stubborn stains and embedded dirt. For best results, leave the Vax Pet
Stain & Odour Remover for 5 minutes before washing the carpet as normal.
Note: The pretreat wand is fitted with 2x AAA batteries. Before first use, pull the tab to remove the
battery protector. Solution can be left in the tank between uses. For prolonged storage, the solution
can be poured back into the bottle.
Pretreat wand
Using your machine
Using the pretreat wand
Replacing the pretreat wand batteries
Press the button to the
release the pretreat wand
and pull to remove.
Press the pretreat wand spray button to spray the
solution. Do not over-saturate. If the solution tank
has just been filled you may need to hold the button
for 10 seconds before the solution is sprayed.
Click the machine into the
upright position. Press the
ON/OFF peddle to switch
the machine off.
Filling the pretreat solution tank
Twist the pretreat solution
tank cap anticlockwise and
remove.
Press the buttons on the
side of the tank and pull to
remove.
Fill the tank with Vax Pet Stain
& Odour Remover. Twist the
solution tank cap clockwise
until tight.
To replace the pretreat
solution tank push the tank
into the handle until it clicks
into place.
Using a crosshead screwdriver,
undo the screw to release the
cover. Slide 2 AAA batteries
into the handle. Refit the cover
and tighten the screw.