background image

Let’s talk safety

Basic  

safety  

precautions

Don’ts

Do’s

This vacuum cleaner is intended for household use only and 

NOT for commercial or industrial use.

READ ALL THE INSTRUCTIONS BEFORE USING 

THIS APPLIANCE

• Only use the vacuum cleaner indoors and keep the area you’re 

cleaning well lit.

• Keep fingers, hair and loose clothing from moving parts and 

openings whilst using the vacuum cleaner.

• This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities 

or lack of experience and knowledge unless they have 

been given supervision or instruction concerning use of the 

appliance by a person responsible for their safety.  

• Do not pull or carry by cord, use cord as a handle, close a door 

on cord, or pull cord around sharp edges or corners. Do not 

place product on cord. Do not run appliance on cord.

• Don’t handle the plug or use the vacuum cleaner with wet hands.
• Don’t use the vacuum cleaner with incorrect voltage as this may 

result in damage or injury to the user. The correct voltage is 

listed on the rating label.

• Don’t vacuum up hot coals, cigarette butts, ash, matches or 

smoking hot burning items or use in an area where there may be 

harmful fluids (chlorine, bleach, and ammonia drain cleaner).

• Always make sure the filter and dirt container are fitted 

correctly before using your vacuum cleaner.

• Turn off all controls on the vacuum cleaner before 

disconnecting or connecting the battery.

• Take extra care when cleaning on the stairs.
• Always switch off the vacuum cleaner before disconnecting 

or connecting the hose and accessories.

• Always protect the charger cord from heated surfaces 

or near open flames.

Содержание pet pro VX39





















Отзывы: