Vax ONE PWR CORDLESS GLIDE Series, Руководство пользователя

Страница: 13 / 15

13
support.vax.co.uk
CLEANING & MAINTENANCE
Press the brushroll cover button and
pull to open the cover.
Unhook the brushroll cover and
remove.
To remove the brushroll, pull the tab
on the end and remove from the
brushroll housing.
IMPORTANT: Make sure both the brushroll and brushroll cover are fitted correctly. If fitted incorrectly
this may cause poor water pick up. For best cleaning results, advanced cleaning of the brushroll
should be done every 5-6 uses. For prolonged storage, the brushroll should be removed, cleaned and
stored in the rinse/storage tray.
REMOVING AND ADVANCED CLEANING OF THE BRUSHROLL
Rinse the brushroll in water (40˚ max)
and allow to dry before refitting.
The brushroll can be dried and stored
in the rinse/storage tray.
Clean the brushroll housing and
brushroll cover of any dirt and debris.
CAUTION: If the brushroll has been obstructed, the brushroll motor protection sensor may have
been activated. The brushroll will stop, the light on the handle will flash white and the machine may
switch off. To reset, remove the brushroll and clear any obstruction. Wait 1 minute before refitting the
brushroll, switch the machine on and recline.
40°C
MAX