background image

SAFETY GUIDE

4

support.vax.co.uk

WARRANTY

If a VAX ONEPWR machine is used 

in the way it is intended and it breaks 

down within the guarantee period, it’s 

our responsibility to repair or replace it. 

Here’s what isn’t covered:

• Normal wear and tear of consumable 

items, for example: belts, filters, 

brushbars, fuses etc.

• Batteries which have become faulty 

as a result of improper handling.

• Batteries which have a reduced 

service life as a result of normal wear.

• Accidental damage

 

- Damage as a result of use not in 

accordance with the product  

user guide.

 

- Damage caused by not carrying out 

regular maintenance.

 

- Damage to the charger cable.

 

- Blockages caused by misuse.

• Faults caused by:

 

- Negligent use, misuse, neglect or 

careless operation of the machine.

 

- Use of the machine cleaner which 

is not in accordance with the  

user guide.

 

- Use of a VAX ONEPWR machine 

for anything other than normal 

domestic household purposes 

in the country in which it was 

purchased.

 

- Use of parts, accessories and 

consumables, which are not 

genuine VAX components.

 

- Faulty installation or repairs – 

unless carried out by a qualified 

electrician or engineer. 

TECHNICAL

EU Statement of Compliance: Manufacturer/EU importer: VAX Limited, hereby on 

our own responsibility, declare that the VAX ONEPWR Blade 4 is manufactured in 

compliance with the following Directives:  

Safety: 2014/35/EU Low Voltage Directive.  

EMC: 2014/30/EU Electromagnetic Compatibility Directive.

Waste electrical products should not be disposed of with household 

waste. Please recycle where facilities exist. Check with your Local 

Authority or retailer for recycling advice.

© 2019 VAX Limited. All rights reserved. The VAX trade mark and VAX lozenge 

are the property of Techtronic Floor Care Technology Ltd and are registered in 

the EU and may be pending or registered in other countries.

VAX Ltd, Artillery House, Heritage Way, Droitwich, WR9 8YB, UK.

Содержание ONE PWR CORDLESS BLADE 4 CLSV-B4BS














Отзывы: