www.vax.co.uk
4
assembly
3. Assembly
Attach upper handle
Remove clean solution tank (upper tank) (Fig.3/1).
With cord hook to back of carpet cleaning machine, push
upper handle down onto lower handle (Fig.3/2).
Push bolts into holes on front of handle (Fig.3/3). If bolts
will not go through hole easily handle is not pushed
completely down.
Place nuts in recessed areas on back of handle. Hold each
nut in place while tightening each bolt securely with a
Phillips screw driver (Fig.3/4).
Only two nuts are needed on this model. The extra nut is
not required but has been provided for your convenience.
When handle sections are completely together, squeeze
trigger on upper handle to snap trigger rod in place
(Fig.3/5).
Replace clean solution tank (upper tank) by positioning
bottom first. Press on tank handle to snap top of tank into
place (Fig.3/6).
Press cord into clip on back of handle. Pull tight (Fig.3/7).
Fig.3/1
Fig.3/4
Fig.3/5
Fig.3/2
Cord hook
Fig.3/6
Fig.3/7
Fig.3/3
Tank handle
Squeeze
trigger
V-130 Oasis User Guide v5.qxd:V-130 Oasis User Guide
8/9/08
14:46
Page 4
All manuals and user guides at all-guides.com
