9. Troubleshooting
WARNING: TO REDUCE RISK OF PERSONAL INJURY, UNPLUG VACUUM CLEANER BEFORE
SERVICING
PROBLEM: Cleaner won’t run
Cause:
Not properly plugged into electrical outlet.
Solution:
Plug in firmly.
Cause:
No electricity in electrical outlet.
Solution:
Check fuse or breaker.
Cause:
On/off switch not turned on.
Solution:
Push on/off switch to on.
Cause:
Motor thermostat has tripped.
Solution:
Switch off and unplug cleaner. Leave for one (1) hour before switching the cleaner back on.
Cause:
Blown fuse/tripped breaker.
Solution:
Reset circuit breaker or replace fuse.
PROBLEM: Vacuum cleaner won't pick up/loss of suction
Cause:
Dust bag not installed correctly.
Solution:
Review dust bag removal and replacement.
Cause:
Dust bag full or blocked.
Solution:
Replace dust bag.
Cause:
Clogged filter.
Solution:
Remove filter and clean.
Cause:
Blockage in hose.
Solution:
Disconnect hose, remove obstruction and then re-fit.
PROBLEM: Accessories won't pick up
Cause:
Accessories not attached correctly.
Solution:
Refer to page 5 for fitting information.
PROBLEM: Dust escaping from the vacuum cleaner
Cause:
Dust bag full.
Solution:
Dispose of dust bag and replace with a new one.
Cause:
Dust bag not installed correctly.
Solution:
Review dust bag removal and replacement.
Cause:
Hose not installed correctly.
Solution:
Review hose installation.
Cause:
Filter not installed completely.
Solution:
Review filter removal and replacement.
Troubleshooting
7
Vax V-002 mojo D6 bf 6/21/05 2:51 PM Page 7
Содержание Mojo II V-002
Страница 9: ...This page has been intentionally left blank 9 Vax V 002 mojo D6 bf 6 21 05 2 51 PM Page 9 ...
Страница 10: ...10 This page has been intentionally left blank Vax V 002 mojo D6 bf 6 21 05 2 51 PM Page 10 ...
Страница 11: ...11 This page has been intentionally left blank Vax V 002 mojo D6 bf 6 21 05 2 51 PM Page 11 ...
