Vax MAGNUM Скачать руководство пользователя страница 7

Страница: 7 / 12

Vax Careline

0870 606 1248

dirt container and filter

Replace foam filter

Return foam filter to cleaner
and snap into place. Replace
foam filter cover and snap
into place to secure
(Fig.5/8)..

NOTE: The filter housing also needs to be washed
regularly with cold water and dried thoroughly before
replacing and restarting the vacuum cleaner.

Remove exhaust filter

Press tab on front of exhaust cover and lift to remove.

Press tab on exhaust filter and lift filter out of base of
cleaner (Fig.5/10).

Clean exhaust filter

Tap the exhaust filter on the inside of a rubbish bin to
remove excess dust and dirt from filter (Fig.5/11)..

Wash the exhaust filter under cold running water every 9
-12 months. Leave to dry for 24 hours before replacing
in machine.

Replace exhaust filter

Return exhaust filter to base of cleaner and snap into
place (Fig.5/12).

Replace exhaust filter cover and snap into place to secure
(Fig.5/13).

Fig.5/8

Fig.5/11

Fig.5/7

Fig.5/10

Fig.5/12

Fig.5/9

Fig.5/13

Vax VZL-401AA Magnum User Guide.qxd:VZL-401 User Guide 11/3/09 09:58 Page 7

All manuals and user guides at all-guides.com

Содержание MAGNUM












