7
Vax Careline
0870 606 1248
operation
To spray cleaning solution, depress the solution release
trigger (Fig 4/6) and move the cleaner backward and
forward. Release the trigger and push the unit back and
forth in the same track to remove dirty water and
solution from the carpet.
For heavily soiled areas, repeat if necessary.
How to carry your cleaner
Grab the carrying handle on the back of the cleaner to
transport from room to room (Fig.4/7).
NOTE: Do not pick the cleaner up by the clean water
tank handle.
Hose attachments
Put the cleaner in its upright position. Turn the brush
switch and power switch to the off position (Fig.4/8).
Remove the hose from its stored position on the back of
the cleaner. Lift the hose attachment cover located on the
top of the dirty water tank (Fig.4/9).
Insert the end of the hose into the tool opening and twist
clockwise until it locks into place (Fig.4/10).
Attach the water supply connector to the water supply
port and press firmly until it locks into place (Fig.4/11).
Move the floor/tools selector to the tools (upward)position
(Fig.4/12).
Fig.4/6
Fig.4/7
Fig.4/8
Fig.4/9
Fig.4/10
Fig.4/11
Fig.4/12