5
Vax Careline
0870 606 1248
usage
5. Usage
Plug machine into power supply
Press power on/off button to turn the cleaner on
NOTE: Never leave the unit unattended with the
power on. Turn off when emptying and filling tanks.
Do not over-wet the carpets.
Washing carpets
Step onto handle release pedal to put into cleaning
position (Fig.5/1)
While depressing the solution trigger, pull carpet washer in
backward motion. Release trigger and push the unit
forward in the same path to remove water and solution
from the carpet (For heavily soiled areas repeat as
necessary)
IMPORTANT: For best cleaning results, use a steady
moderate, forward and backward motion.
IMPORTANT: If the sound of the motor changes
and the float rises, this indicates that the dirty
water tank is full and must be emptied
Washing stairs and upholstery
Fill the trigger spray bottle with Vax AAA cleaning
solution, according to the directions given on the bottle
(Fig.5/2)
NOTE: The handheld must be used in conjuncton with
the trigger spray bottle. The unit alone is for wet
recovery only.
Fill the remainder of the bottle with warm water
(max 40°C).
Ensure the cleaner is in the upright position.
Remove the handheld from the front of the upright by
moving the handle slide release to the left (Fig.5/3).
The top of the handheld should be removed first, at an
angle, followed by the bottom (Fig.5/4)
Push the wash tool onto the end of the handheld
(Fig.5/5)
Press the power on/off button to turn the cleaner on.
Using the separate trigger bottle, spray the water and
solution onto the area to be cleaned. Move the wash tool
in a backwards and forwards motion to agitate embedded
dirt and stains (Fig.5/6).
!
!
Fig.5/1
Fig.5/2
Fig.5/3
Fig.5/4
Fig.5/5
Vax V-126 User Guide.qxd:V-126 User Guide
17/9/07 14:17 Page 5
All manuals and user guides at all-guides.com
