9
Vax Careline
0870 606 1248
troubleshooting/ UK service & help/ technical specification
6. Troubleshooting
WARNING: To reduce the risk of personal injury,
unplug the vacuum cleaner before performing
maintenance or troubleshooting checks.
PROBLEM: Cleaner won’t run
Cause:
Power cord not firmly pushed into a mains
socket.
Solution:
Plug cord in firmly.
Cause:
Blown fuse or tripped circuit breaker.
Solution:
Check fuse/breaker. Replace fuse or reset
breaker.
Cause:
Needs service.
Solution:
Call Vax Care 0870 606 1248.
PROBLEM: Hand Vac won’t pick up/loss of suction.
Cause:
Dirty water tank is not installed correctly.
Solution:
Review dirty water tank removal and
replacement.
Cause:
Dirty water tank is full.
Solution:
Empty the dirty water tank.
PROBLEM: Water escaping from the Cleaner
Cause:
Dirty water tank is full.
Solution:
Empty the dirty water tank.
Cause:
Dirty water tank is not installed correctly.
Solution:
Review dirty water tank removal and
replacement.
Cause:
Solution tank not installed correctly.
Solution:
Review solution tank installation.
PROBLEM: Cleaner won’t dispense
Cause:
Spray nozzle clogged
Solution:
Clean thoroughly.
Cause:
Solution tank not installed properly
Solution:
Review solution tank installation.
7. UK Service & Help
Vax Care 0870 6061248
Monday-Friday
8.00am to 8.00pm.
Saturday-Sunday 9.00am to 5.00pm.
Any queries or concerns about using the Vax, call the Vax
Careline. Calls are charged at the UK national rate.
Please make a note of the serial number and model
number of the carpet cleaner before calling. There are
over 400 approved Vax Service Agents in the UK. For the
nearest Service Agent, please call the Vax Careline.
www.vax.co.uk
8. Technical Specification
Adaptor voltage:
230-240V ~50Hz
Wattage:
200W
Cord length:
5.9m (approx)
Capacity:
0.26l clean
0.32l dirty
Filter:
foam pad filter
Subject to technical change without notice.
!
Vax V-035B Infinity User Guide.qxd:V-035B Infinity UG 20/10/08 17:22 Page 9
All manuals and user guides at all-guides.com
