Removing blockages from the TurboTool*
1
2
3
4
Removing debris
from the brushbar
Vacuuming the stairs
Switch of your vacuum
cleaner at the main socket.
Using a pair of scissors
cut any hair or debris free
from around the brushbar.
Ensure that the vacuum
is upright at the top or
bottom of the stairs while
vacuuming.
Do not lean on the machine
while using the hose.
Changing the belt
Switch of your vacuum
cleaner at the main socket
and unplug. Remove the
4 screws on the bottom
of the loorhead.
Lift the brush from the
machine starting at the
side without the belt on.
Squeeze the sides of the
loor plate to release it.
Unhook the belt from the
motor spindle in the belt
compartment. (This may
be easier if you use a
screwdriver to do this).
Remove the loor plate.
Place the new belt
around the brush bar.
Remove the belt cover.
Let’s talk technical
Let’s talk technical
Feed the other side into
the belt compartment.
Using a screwdriver,
hook the belt onto the
motor spindle.
Reinsert the brushbar. One end of the
brushbar has a square slot, and one end
has a circular slot, ensure that it is put
back into the correct position.
*Not applicable for all models.
