Vax Impact 302 C86-ID-Pe Скачать руководство пользователя страница 3

3

 

Turn off all controls on the vacuum 

cleaner before disconnecting or 

connecting the power cord. 

3

 

Always keep the power cord away 

from the brushes whilst using your 

vacuum cleaner. After use always 

wrap the power cord around the 

cord clips provided.

3

 

Always make sure both the          

pre-motor/post motor filters are       

in place before use.

3

 Always make sure the brushbar is 

set to hard floor when using your 

vacuum on the stairs and take extra 

care when positioning the vacuum 

cleaner on the stairs.

3

 

Always switch off the vacuum 

cleaner before disconnecting or 

connecting the hose and accessories.

3

 

Keep all openings clear and free  

from debris as this may affect the 

airflow/suction.

3

 

Always replace the fuse in the 

    plug with a British 5amp fuse. 

Always protect the power cable  

from heated surfaces 

    and open flames.

3

 

Use only CE approved 5amp 

extension cords, non-approved 

extension cords may overheat.  

Care should be taken to arrange  

the extension cord as it could be  

a trip hazard.

3

 

Store the vacuum cleaner in a cool, 

dry area. If filters have been cleaned 

as per user the guide instructions 

ensure they are thoroughly dry 

before storing away.

Do’s

Don’ts

8

 

Don’t attempt to remove blockages 

with sharp objects as this may cause 

damage to your vacuum cleaner.

8

 

Don’t vacuum up hard or sharp 

objects such as glass, nails, screws 

or coins etc.

8

 

Don’t use the vacuum cleaner with 

incorrect voltage as this may result  

in damage or injury to the user.  

The correct voltage is listed on the 

ratings label.

Let’s talk safety

Содержание Impact 302 C86-ID-Pe

















Отзывы: