Clearing a blockage from the brushbar
Using a pair of scissors remove any threads or hair
caught around the brushbar.
Remove the brushbar lifting the side of the brushbar
nearest the release lock first.
To release the brushbar pull and lift the release lock
located underneath the floorhead.
Replace the brushbar. Fit the inverted round end of the
brushbar first, then line up and push the other side of
brushbar into the floorhead. Refit the release lock.
CAUTION:
If the brushbar has been obstructed, the Motor Protection Sensor may have been activated. Remove the handheld
and floorhead and clear any obstruction from the brushbar. Wait 30 minutes for the vacuum cleaner to reset itself. Replace the
handheld and floorhead and retry.
Taking care of your machine
Don’t forget your accessories!
Order at:
www.vax.co.uk/spares-and-solutions
2-in-1 tool (Type 3)
1-9-137520
A replacement 2-in-1 tool for your
Dynamo Power cordless vacuum.
Pre-motor filter (Type 132)
1-7-137521
