www.vax.co.uk
6
dirt container & filter
Rotate anti-clockwise and pull away from the dirt
container (Fig. 6/4). The dirt container may be wiped to
clean.
The central filter should then be cleaned with a soft brush
and wiped with a damp cloth (Fig.6/5).
Leave the central filter to completely dry before replacing.
IMPORTANT: The central filter should not be
submerged in water.
NOTE: Do NOT use any detergents or boiling water to
wash the filter.
Vax recommends washing the filter
every time you empty the dust container.
Replace the filter back in the dirt container turning it
clockwise into lock position.
Replace the dirt container as directed.
Cleaning the Pre Motor Filter
Remove the dirt container as directed.
Remove the filter as shown (Fig.6/6).
Rinse the pre-motor and foam filter in warm water (max
40ºC) allow to air dry for at least 24 hours before replacing
(Fig.6/7).
Return the pre-motor filter to the dirt container and then
to the vacuum cleaner.
Cleaning the Post Motor Filter
NOTE: This is located at te rear of the vacuum cleaner.
Release the post-motor cover by pressing in the catch at
the top of the cover.
Remove the filter by pulling the filter away from the cover.
(Fig.6/8).
Fig.6/3
Fig.6/4
Fig.6/6
Fig.6/7
Fig.6/8
Fig.6/5
!
Vax V-112 Range User Guide.qxd:V-112 Range User Guide 2/10/08 13:07 Page 6
