![Vax FORCE3 VZL-118 Series Скачать руководство пользователя страница 4](http://html.mh-extra.com/html/vax/force3-vzl-118-series/force3-vzl-118-series_instruction-manual_856748004.webp)
vax.co.uk
4
assembly / operation
3. How to Assemble
IMPORTANT: Always unplug the vacuum cleaner
from the electrical outlet before assembling or
removing the accessories.
1.
Insert the flexible hose into the inlet on the main body
of the vacuum cleaner. Push in until it clicks into
position (Fig.3/1).
2.
Push the telescopic extension tube on to the end of
the handle (Fig.3/2).
3.
The telescopic extension tube can be lengthened or
shortened by pushing the button in and sliding the
tube apart or together as required (Fig.3/3).
4.
Fit the combination floor head
(Model: VZL-118P & PS
only)
or TurboBrush
(Model: VZL-118AT, PS & C only)
or
Hard Floor tool head
(Model: VZL-118AT & C only)
by
pushing onto the extension tube (Fig.3/4).
4. How to Operate
Cord Release
Fully unwind the power cord. A yellow mark on the power
cord indicates the recommended cord length. Do not
exceed the cord length beyond the red mark.
On/Off Button
Insert the power plug into the electrical outlet. Ensure the
vacuum cleaner is switched off.
Press the on/off button located on the top of the vacuum
cleaner and press the button again to turn the vacuum
cleaner off.
Carpet Cleaning
Model VZL-118P & PS only:
For carpet and rug cleaning
press the rocker switch on the combination floor head to
raise the brushes.
Model VZL-118AT
,
PS & C only:
Attach the TurboBrush
floor head to the end of the extension tube. (NOTE:
TurboBrush: for pet hair, stair and large carpeted areas.
NOT recommended for hard floors.)
Hard floor cleaning
Model VZL-118P & PS only:
For hard floor cleaning, press
the rocker switch on the combination floor head to lower
the brushes.
Model VZL-118AT & C only:
Attach the hard floor tool
head to the end of the extension tube. (NOTE: For parquet
and laminate coverings).
TurboTool
(Model: VZL-118P & PS only)
:
IMPORTANT: The TurboTool connector must be
added to the handle before the TurboTool may
be attached.
for vacuuming up pet hair, stair and upholstery cleaning.
(NOTE: Do not use the TurboTool on suede and leather
surfaces).
Stretch hose
(Model: VZL-118AT, PS & C only)
:
For full
height stair cleaning (NOTE: This should not be used as the
main vacuum hose).
NOTE: For stair cleaning, the unit should always be
placed at the bottom of the stairs.
NOTE: The stretch hose is recommend to be used for a
period of 20 minutes max.
Cord Rewind
To rewind the power cord, press the cord rewind button,
located on the top of the vacuum cleaner, and guide the
power cord with one hand. This will prevent the cord from
whipping which could cause damage or injury.
Carry Handle
Use the carry handle located on the top of the machine to
move the vacuum cleaner from room to room.
Fig.3/1
Fig.3/2
Fig.3/3
Fig.3/4
!
!
Vax VZL-118 Series User Guide.qxd:04.09
24/4/09 10:06 Page 4
All manuals and user guides at all-guides.com