7
Vax Careline
0870 606 1248
filters / clearing blockages
The post-motor filter can be removed from the unit then
may be rinsed in luke warm water max (40°C). Allow to air
dry for at least 24 hours before replacing (Fig.7/6).
Replace the post-motor filter back in the case and return
to the vacuum cleaner.
8. Cleaning Blockages
WARNING: To reduce the risk of electric shock,
the power cord must be disconnected before
performing maintenance/troubleshooting checks.
1.
Turn the vacuum cleaner off and unplug from the
electrical outlet.
2.
The flexible hose can be disconnected from the
vacuum cleaner by turning the hose to the left and
pulling away from the machine. Remove any
blockages found then reconnect the hose securely.
Removing debris from the TurboBrush
(Model: V-118CP only)
The brushbar will stop rotating if it is blocked during
operation by vacuuming up foreign objects, or is strands of
carpet are wrapped around it.
Switch the vacuum cleaner off and disconnect the power
plug from the electrical outlet.
Lay the TurboBrush floor head on a flat surface and turn
over to expose the brushbar. Using a pair of scissors, cut
through any threads or hairs caught by the brushbar that
have wrapped around the guides (Fig.8/1).
Fig.7/6
!
Fig.8/1
Vax V-118(CP) User Guide.qxd 30/8/07 09:17 Page 7
