Turn the dirt container
lid anti-clockwise
to remove.
Wash pre-motor filter
under running water.
Lift to remove the
pre-motor filter out
of dirt container.
Tap the filter against a bin
to remove excess debris.
Leave to dry for 24 hours or
until fully dry before placing
back in the machine.
Using your machine
Taking care of your machine
MAX
40˚C
TA
P
24hr
Emptying and cleaning the dirt container
Cleaning the pre-motor filter
Hold dirt container over the bin.
Press release clip at the bottom
of the container, the dirt release
door will open allowing dirt/debris
to fall out.
Press dirt container
release button. Lift to
remove dirt container
from machine.
IMPORTANT:
Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks.
NOTE:
Clean the pre-motor filter every time the dirt container is emptied and replace the filters every 12 months.
Filters available at www.vax.co.uk
Don’t over fill the dirt container to
avoid blocking the air flow through
the vacuum cleaner.
Slide vent cover on hose grip open
to reduce suction if required.
TIP
