Vax Edge Pet & Car CLUP-EGKS, Руководство пользователя

Страница: 10 / 22

8
Getting started
NOTE: The mini motorised pet tool will only activate when the machine is locked to the upright position.
Stand the machine in the upright position. Slide the mini motorised pet tool onto the
end of the hose until it clicks into place.
Press the on/off button to switch the
machine on.
Press the
HARD FLOOR or CARPET
mode to switch the mini motorised
brushbar on/off. For delicate surfaces
select HARD FLOOR .
Press the boost button to increase the
suction for particulary dirty areas.
IMPORTANT: If the brushbar in the mini motorised pet tool has been obstructed, the motor protection
sensor may activate and the brushbar will stop. Switch off the machine, remove the tool from the
hose and clear any obstruction. Wait 1 minute before refitting. To reactivate the brushbar, switch the
machine on and choose a floor selector button.
NOTE: The mini motorised pet tool base
plate can be rotated so it can be used
flat or horizontally for all angle cleaning.
Press the hose release clip and pull to
remove the hose from the hose holder.
Using the mini motorised pet tool
HARD
FLOOR
CARPET