Using your machine
Twist the quick release
cord hook to release the
power cord.
How to use
Before you begin cleaning
• Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing and
emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat
will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug from electrical
socket. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum cleaner to cool
for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters to fully dry before putting back into
the vacuum).
• For best cleaning results, filters should be tapped over a bin every 4-6 uses to remove dirt and debris and washed
every 3 to 6 months (depending on the level of use).
• If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
• When using the accessories always make sure the brushbar is raised to the highest setting.
IMPORTANT:
When the vacuum cleaner is stood in the upright position or when using on stairs and the hose/tools,
the brushbar height adjust dial must be set to hard floor.
Choose your desired carpet
height or hard floor setting.
Plug in your machine and
push On/Off button to
switch on.
Don’t over fill the dirt
container to avoid clogging
your filter.
Lie vacuum cleaner on its
back exposing brushbar.
Align Hard Floor Adaptor
with base of vacuum
cleaner, push until its clicks
into place.
Using the Hard Floor Adaptor
Apply the Hard Floor Adaptor for optimum results on hard floors.
The Hard Floor Adaptor can be used on any floor setting.
TIP
To ensure the Hard
Floor Adaptor is
correctly fitted,
the wheels should
be towards the back
of the floor tool
when attached to
vacuum cleaner.
