Using your machine
Filling the water/solution tank
Press the clean water/
solution tank release
button, pull and lift to
remove tank.
Twist the water/solution
tank cap anti-clockwise
and remove.
Using the clean water tank
cap, add the appropriate
amount of solution required
and pour into the clean
water tank. See directions
on the reverse of the
solution bottle for required
amount of solution.
Twist the water/solution
tank cap clockwise to re-fit.
Fill the clean water/solution
tank to the ‘max fill’ mark.
Tilt the tank and line up
onto the carpet washer.
Push the tank back until
it clicks into place.
Using your machine
CAUTION
:
Always unplug the carpet washer before performing any maintenance/troubleshooting checks.
NOTE:
Using more solution than recommended may cause excessive foaming.
TIP
When cleaning an entire room, move
furniture out of the area to be cleaned.
If the furniture is too heavy to move,
place aluminium foil or wax paper
under legs. This will prevent wood
finishes from staining your carpet.
Pin up furniture skirts and curtains.
