10
Let’s talk technical
Remove the tanks and
lie the carpet washer on
it's back exposing the
brushbar.
Using a crosshead
screwdriver remove the
5 screws around the
brushbar and the 1 screw
by the back wheel.
Pull to remove the belt cover. Lift the brushbar out
from the left hand side first and unloop the brushbar
from the belt. Pull the brushbar to remove from the
carpet washer.
Removing and cleaning the brush bar
Removing and cleaning the nozzle
Remove both tanks and
tilt the carpet washer
back. Lift the nozzle from
the top and pull forward
to remove.
Rinse the nozzle under
water to remove
dirt/debris.
To replace the nozzle, line up the tabs on the nozzle
with the tabs underneath the front of the carpet washer.
Push the nozzle down until it clicks into place.
IMPORTANT:
Carpets should be dry vacuumed thoroughly before washing. This will help prevent excessive build up of
dirt/debris in the nozzle.
If the nozzle is fitted incorrectly, this will cause poor dirty water pick up.
Using a pair of scissors, remove
any threads or hair caught around
the brushes. Rinse under water to
remove debris.
1
2
Remove the screw at the
bottom of the centre bar
and lift upwards.
Содержание Compact Power VX97
Страница 12: ... Registration required Terms and conditions apply Getting in touch 12 ...
Страница 13: ...13 Notes ...
Страница 14: ...14 Notes ...
Страница 15: ...15 Notes ...