After wrapping the tube around the hose, affix Solution
Tube (A) to Hose (B) using Clips provided (C) to hold it in
place (Fig.4/4).
Push end of Solution Tube onto connective valve
on the Wash Head / Upholstery Tool (Fig.4/5).
5. Usage
Plug in machine to power supply.
Press the red button to turn on the power.
Press the green button to activate the pump.
On the Fibreflow wash head ensure that the rocker switch
(A) is towards the back of the head to allow water to flow
through the head (Fig.5/1).
In order to help suck up excess water, the rocker switch
(A) can be pushed to the front position on the Fibreflow
was head. This will prevent water flow, allowing excess
water to be removed (Fig.5/2).
In order to wash upholstery, including stairs and soft
furnishings simply detach Fibreflow wash head from
wand and solution tube and replace with upholstery wash
tool as shown (Fig.5/3).
NOTE: Do not store cleaner with solution in
clean water tank or dirty water in dirty water
tank. Mineral deposits and mildew can form which will
affect the performance of the carpet washer.
5
Vax Careline
0870 606 1248
assembly / usage
Fig.4/4
A
B
C
Fig.4/5
!
Fig.5/1
A
A
Fig.5/2
Fig.5/3