IF YOU HAVE WASHING DIFFICULTIES, CHECK..
1 The trigger is switched to ON when washing carpets
2 The weight on the end of the transparent tube is at
the bottom of the clean water bucket
3 The dirty water bucket is not full, causing the
automatic cut off valve to stop the suction
4 There are no kinks in the transparent tube
Remove kinks by rubbing the tube between finger and thumb.
5 The washing tool is flat on the surface
being washed
AFTER WASHING - ALWAYS
Clean your VAX thoroughly
Keep your VAX assembled.
Clean the washing tool, extension tubes and hose, by sucking up
some clean warm water.
After sucking up the water, leave your VAX switched on, air
flowing through the hose will help dry it out.
AFTER WASHING - REGULARLY
Clean out the washing tool
Push on the transparent tube connector, the clear plastic insert
will drop out.
The black plastic strip can also be pushed out using a screwdriver
or similar tool.
Always ensure that it is replaced the right way up as shown.
Washing : If you have difficulties
What to do after washing
8