8
8. Storage
IMPORTANT:
Always unplug the vacuum cleaner
from the electrical outlet and rewind the power cord
as directed before storing.
NOTE:
Always store the vacuum cleaner base
down.
9. Troubleshooting
WARNING:
To reduce the risk of personal injury,
unplug the vacuum cleaner before servicing.
PROBLEM: Vacuum cleaner won't run
Cause:
Not properly plugged into electrical
outlet.
Solution:
Plug in firmly.
Cause:
No electricity in the electrical outlet.
Solution:
Check fuse or breaker.
Cause:
On/off switch not turned on.
Solution:
Push on/off switch to ‘on’.
Cause:
Motor thermostat has tripped.
Solution:
Switch off and unplug the vacuum
cleaner. Leave for one (1) hour before
switching the vacuum cleaner back on.
Cause:
Blown fuse/tripped breaker.
Solution:
Reset circuit breaker or replace fuse.
PROBLEM: Cleaner won’t pick up/loss of
suction.
Cause:
Dust bag not installed correctly.
Solution:
Review dust bag removal and
replacement.
Cause:
Dust bag full or blocked.
Solution:
Replace dust bag.
Cause:
Clogged filter.
Solution:
Remove clogged filter and replace with
a new one.
Cause:
Blockage in hose.
Solution:
Disconnect hose, remove obstruction
and then re-fit.
PROBLEM: Accessories won’t pick up.
Cause:
Accessories are not attached correctly.
Solution:
Refer to section 5.
PROBLEM: Dust escaping from the vacuum
cleaner.
Cause:
Dust bag full.
Solution:
Dispose of dust bag and replace with
a new one.
Cause:
Dust bag not installed correctly.
Solution:
Review dust bag removal and
replacement.
Cause:
Hose not installed correctly.
Solution:
Review hose installation.
Cause:
Filter not installed completely.
Solution:
Review filter removal and replacement.
Storage / Troubleshooting
V-076 User Guide 25/8/06 10:47 Page 9
