5
filters / clearing blockages
Cleaning the Post-Motor Filter
NOTE :
This is located at the rear of the vacuum cleaner.
8. Clearing Blockages
Hose Blockages
The flexible hose may be disconnected from the vacuum
cleaner. Carefully remove any blockages found and
reconnect hose securely.
Clearing debris from the TurboTool
(Some models only)
NOTE: Switch the cleaner off and disconnect the power
plug from the electrical outlet.
Removing debris from the TurboBrush
(Some models only)
The brushbar will stop rotating if it is blocked during
operation by vacuuming up foreign objects, or if strands of
carpet are wrapped around it.
Switch the vacuum cleaner off and disconnect the power
plug from the electrical outlet.
Lay the TurboBrush floor head on a flat surface and turn
over to expose the brushbar. Using a pair of scissors, cut
through any threads or hairs caught by the brushbar that
have wrapped around the guides (Fig.7/4).
Accessory Blockages
Remove accessory from hose handle/ tube. Carefully
remove the blockage and return to the cleaner.
24
WARNING :
To reduce the risk of electric shock, the power cord must be
disconnected before performing maintenance/ troubleshooting checks.
Turn the vacuum cleaner off and unplug from the electrical outlet.
!
TAP
locking ring
tabs
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
C91-P2 & C90-P2 Series User Guide.qxd:C91-P2 Series User Guide 29/1/10 14:44 Page 5
