vax.co.uk
7
Looking after your machine –
Removing Blockages
Clearing blockages
Hose blockages
Accessory blockages
Remove accessory from the hose/telescopic
tube. Carefully remove the blockage and return
to the cleaner.
The flexible hose may be disconnected
from the vacuum cleaner. Carefully remove
any blockages found and reconnect the
hose securely.
WARNING:
To reduce the risk of electric shock, the power cord must be disconnected before performing
maintenance/troubleshooting checks. Turn the vacuum cleaner off and unplug from the electrical socket.
IMPORTANT:
If the air inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove
the blockage(s) before re-starting the vacuum cleaner.
Turn the TurboTool over and
slide off the locking ring.
Lay the Turbobrush on a flat surface and turn over to expose
the brushbar. Using a pair of scissors, cut through any
threads or hairs caught by the brushbar that have wrapped
around the guides.
Detach lower housing and
remove blockage.
To re-assemble the
TurboTool, ensure that
the tabs are engaged
and pivot the lower
housing closed.
Slip the locking ring
over the neck of the
TurboTool and into
the groove to finish.
Locking ring
1
2
Tabs
3
Removing blockages from the TurboTool (Some
models only)
Removing blockages from the Turbobrush (some models only)
