background image

4

support.vax.co.uk

WARRANTY & TECHNICAL

VAX Ltd, Artillery House, Heritage Way, Droitwich, WR9 8YB, UK.

WARRANTY

If a VAX ONEPWR machine is used 

in the way it is intended and it breaks 

down within the guarantee period, it’s 

our responsibility to repair or replace it. 

Here’s what isn’t covered:

• Normal wear and tear of consumable 

items, for example: belts, filters, 

brushbars, fuses etc.

• Batteries which have become faulty 

as a result of improper handling.

• Batteries which have a reduced 

service life as a result of normal wear.

• Accidental damage

 

- Damage as a result of use not in 

accordance with the product  

user guide.

 

- Damage caused by not carrying out 

regular maintenance.

 

- Damage to the charger cable.

 

- Blockages caused by misuse.

• Faults caused by:

 

- Negligent use, misuse, neglect or 

careless operation of the machine.

 

- Use of the machine cleaner which 

is not in accordance with the  

user guide.

 

- Use of a VAX ONEPWR machine 

for anything other than normal 

domestic household purposes 

in the country in which it was 

purchased.

 

- Use of parts, accessories and 

consumables, which are not 

genuine VAX components.

 

- Faulty installation or repairs – 

unless carried out by a qualified 

electrician or engineer. 

TECHNICAL

EU Statement of Compliance: Manufacturer/EU importer: VAX Limited, hereby 

on our own responsibility, declare that the VAX ONEPWR Blade 4 Pet is 

manufactured in compliance with the following Directives:  

Safety: 2014/35/EU Low Voltage Directive.  

EMC: 2014/30/EU Electromagnetic Compatibility Directive.

Waste electrical products should not be disposed of with household 

waste. Please recycle where facilities exist. Check with your Local 

Authority or retailer for recycling advice.

VAX is a trade mark of Techtronic Cordless GP.

© 2020 Techtronic Cordless GP. All rights reserved.

VAX Ltd, Artillery House, Heritage Way, Droitwich, WR9 8YB, UK.

Содержание BLADE 4 PET















Отзывы: