safety
user guide
advanced vacuum technology
9
Do’s
Ensure the mains cable is kept well away from the revolving brushes of your VAX, when it is turned
on and running.
Keep the mains cable away from heat, oil, liquids, sharp edges and rough surfaces and avoid
damage in any other way.
Exercise extreme care when cleaning stair carpets. Ensure that your VAX is in a stable position at
the bottom of the stairs without over-stretching the hose or cable.
Follow the instructions in this easy guide when fitting accessories or tools.
Remove the plug from the wall socket before carrying out any maintenance specified in this guide.
Store your VAX in a dry place.
Have your VAX serviced by an authorised VAX Service Agent only using genuine VAX spare parts.
Take care when removing dust and debris from your VAX, to avoid injury.
Don'ts
Never allow children to tamper or play with your VAX.
Never drag your VAX by the mains cable.
Never tug at the mains cable to remove the plug from the wall socket.
Never remove the brush bar cover it should only be removed by a qualified service agent.
Don’t let anyone touch the rotating brush bar unless your VAX is disconnected from the mains.
Never use your VAX in the presence of flammable gases.
Avoid sucking up hot items, hazardous liquids or any other material which could damage your VAX.
Never leave your VAX running unattended.
Never use without the ‘easyview canister’.
If your VAX fails to operate, never attempt to repair it yourself as repairs carried out by an
unauthorised or inexperienced person may cause injury to you or damage to your VAX.
Never alter the specification or modify your VAX in any way.
This appliance is not intended for use by young or infirm persons without supervision.
To keep you and your AVC in good working
order it is recommended you follow this advice.
A moulded plug, suitable for most UK
households is supplied with your AVC.
The moulded plug has a 13 amp fuse approved to B.S 1362 A.S.T.A. If you need to replace the
fuse, check that it is a 13 amp fuse.
After changing a fuse in a moulded plug, the fuse cover must be put back.
THE VACUUM CLEANER MUST NOT BE EARTHED
The mains lead to your VAX has two inner wires.
The wires in the mains lead are coloured in accordance with the following code.
BLUE - NEUTRAL
BROWN - LIVE
If the plug provided is unsuitable for your socket outlets, an alternative plug may be fitted.
The cut-off plug must be disposed of immediately. The replacement must be a 13 amp rated plug
with a 13 amp fuse fitted.
When contacting us:
Please make a note of the serial number and
model number of your VAX before calling
They can be found on the label on the bottom
of your VAX.
In person
There are over 400 approved VAX Service Agents in
the UK and over 300 approved VAX Service Agents
in Australia offering quality repair and a spares
service. If you want to know the location of your
nearest VAX Service Agent or have any queries or
concerns about using your VAX, please call the
VAXCARE HELPLINE:
uk
0870 6061248
Open Monday to Friday 9.00am to 5.00pm
Calls are charged at national rates.
australia
1300 364040
Open Monday to Friday 10.00am to 6.00pm
Eastern Standard Time
electrical supply - UK only
more help
10
user guide
advanced vacuum technology
You can email any questions or comments to:
australia
[email protected]
Telephone
You can call our VAXCARE HELPLINE:
uk
0870 6061248
Open Monday to Friday 9.00am to 5.00pm
Calls are charged at national rates.
australia
1300 364040
Open Monday to Friday 10.00am to 6.00pm
Eastern Standard Time
VAX AVC 10th D.Aus 16/8/01 9:43 am Page 11
