Looking after your machine
Getting started
How to use
1. Insert the handle.
2. Pull handle up/down to adjust to the
desired height.
Attach the hose end to the floorhead
ensuring it clicks into place.
(All accessories can be used by either
attaching them to the handle or the hose.)
For brushbar position, press the brushbar
on/off button at the top of the unit.
Brushbar on — carpets.
Brushbar off — hard floors.
Twist the handle to manoeuvre under
and around furniture.
For full instructions, please refer to the online
user guide at vax.co.uk/support
For above the floor cleaning, turn brushbar off, remove handle from the unit and attach
to hose. Always hold the unit during above the floor cleaning.
For brushbar blockages, refer to the online user guide at
vax.co.uk/support
on how to unblock.
IMPORTANT:
Do not use your vacuum cleaner without all of the filters in place.
Performance is everything.
Performance is everything.
vax.co.uk
vax.co.uk
Twist the cord holder to release the cord.
Plug in your machine and turn it on.
Pre-motor filter
Lifetime
Post-motor filter
Parts and accessories
Filter kit (Type 60): 1-1-132030-00
Turbo tool (Type 1): 1-1-126261-00
Flat upholstery tool: 1-1-131394-00
Flexi crevice tool (Type 1): 1-1-131393-00
Fur and Fluff tool: 1-1-131392-00
The use of genuine vax spare parts helps to
maintain optimised performance and validates
your guarantee
If you require spare parts or would like some
more accessories, please visit
vax.co.uk/support
or call our customer care centre:
(UK) 0844 412 8455 (ROI) 1-800 928 308
Wash filters with warm water (40
o
C max) at least
every 3 months for best cleaning results
.
For
detailed information on maintaining your vacuum
cleaner and its filters, please refer to the full user
guide at
vax.co.uk/support
1
2
