13
Cleaning and maintenance
Using a coin, turn the
brushroll cover clockwise.
The cover will sit flush to
the floorhead when locked
into place.
With the cover in the
unlocked position slot the
brushroll into the right side
of the floorhead first and
push the end cap into place.
Using a coin, push and turn
the brushroll cover to the
unlock symbol.
NOTE: The brushroll cover
cannot be removed.
Check the floorhead inlet
for any blockages and use
a blunt object to remove
the blockage.
Clear any dirt/debris inside
the brush housing.
Use a damp cloth to remove
any dirt/debris from
the brushroll. Allow the
brushroll to fully dry before
refitting.
DO NOT wash or over
saturate the brushroll.
Refit the end cap onto
the brushroll.
Pull to remove the end
cap and slide any hair
and threads off the end
of the brushroll.
Hold the tab and pull away
the brushroll from the
brush housing.
Removing and cleaning the brushroll
NOTE: For best performance and to reduce hair and dirt build up, remove and clean the brushroll
every 1-2 months (depending on the level of use).
